+8613023616382

Anti-rust Measures Of Garden Tools

Jan 12, 2020

1. Choose a suitable storage place

The places where metal materials are stored should be clean and dry, no matter inside or outside the warehouse, away from the factory workshops that produce harmful gases and dusts, and should not be mixed with acids, alkalis, salts and gases, powders and other substances. Batch storage; when different types of metal equipment are stored in the same place, there must be a clear separation distance to prevent contact corrosion. General hot-rolled steel, etc. can be stored in the shed or tarpaulin; all magnesium alloys, small steel, thin plates, belts, precision equipment, metal products and non-ferrous metal materials should be stored in the warehouse, and can be stored in a dedicated warehouse

2. Keep the warehouse dry

To ensure that the relative humidity of the warehouse is below the critical humidity, the relative humidity should generally be controlled at about 70%. Manage the temperature and humidity of the warehouse, keep abreast of weather changes, avoid typhoons and rainstorms, and use ventilation methods to cool down and tide. Desiccant placed in the warehouse can also play a role in reducing the tide. Keeping the warehouse dry is an important condition to ensure that the warehoused hardware products prevent or reduce corrosion.

3. Proper palletizing, tarpaulin and sealing

Proper palletizing and tarpaulin is also one of the anti-moisture and anti-damage links of hardware products. Palletizing requirements must be reasonable, firm, quantitative, neat, and save space. The seal isolates the metal material from the outside air and reduces the effect of moisture on rust. The metal materials to be sealed must not be exposed to moisture before sealing, and the quality is intact.

4. Anti-rust by oil injection method

In the humid and hot area in the south, the metal equipment stored in the open air can not achieve the desired rust prevention by using only the toe cover. Oil and rust can be sprayed at the same time, but it is not suitable to spray steel reinforcement and cold-drawn steel Those who are oily cannot use this method.

5. Protective layer and packaging of protective equipment

In order to prevent metal products from rusting, anti-corrosion treatment is generally done at the factory, such as chemical treatment to generate protective film, coating anti-corrosion agent or anti-corrosion packaging. It is necessary to prevent damage to the rust-proof outer layer and packaging during handling, loading, unloading, and storage, and not to damage, press, or deform under pressure. Those with damaged packaging should be repaired or replaced, those with moisture should be dried, and those with anti-rust oil stains or dried should be removed and repainted.


Du kan også lide

Send forespørgsel